Rabu, 23 Juli 2008

Geologist - PT AGC Indonesia

PT AGC Indonesia is a mineral exploration company based in Jakarta. The company is a wholly owned subsidiary of South Gobi Energy Resources of Canada (www.southgobi.com).

Minimum qualification:
• University Graduate in Geology
• Willing to work at the Company projects
• Porphyry Cu-Au and epithermal experiences will be highly regarded

Applicants should have strong interpersonal and communication skills. Fluency in English and computer skills will be an advantage. PT AGC Indonesia offers employees attractive compensation packages and a dynamic working environment.

Please submit your employment application with a CV and photograph to PT AGC Indonesia at AdminAGC@southgobi.com no later than 31 July 2008.

Selasa, 22 Juli 2008

Tendering/Application Engineer - Oil & Gas - PeopleSource

PeopleSource is an international Executive Search firm headquartered in Singapore and focusing on the Indonesian market. Our client is a Multinational Medium and Low Voltage Energy Distribution Components Manufacturer.

Requirements :
- Degree in Electrical or Polytechnic (Majoring in Power preferable)
- Must have knowledge of electrical distribution system and familiar with oil & gas process would be an advantage
- Strong control and protection knowledge
- Familiar with HV/LV Switchgear and other T&D equipment
- Involved in tendering process
- Knows how to use ETAP software would be an advantage
- Good negotiation skill
- Effective Team Player
- Fluent in English
- Proactive / persuasive to drive the project and milestones

Qualified candidates are requested to submit a comprehensive resume, contact number and recent photograph to: rosy@peoplesource-solutions.com

Minggu, 20 Juli 2008

Various position - Talisman Energy Inc

Talisman Energy Inc. is an independent, upstream oil and gas company headquartered in Calgary, Alberta, Canada, operating in North America, the North Sea, South East Asia, Australia, North Africa, Trinidad and Tobago, and currently producing 485,000 boe/d worldwide.
Business Analyst (Ref 07 - 0519)
Responsibilities
:
• Assist in the preparation of capital and operating budgets for the non-operated contract areas & Prepare reports and analysis on non-operated production areas.
• Assist in the preparation of year end reserve estimates and cash flows under existing economic operating conditions and in the preparation of the annual reserves report.
Requirements:
- Min 8 - 10 years,
- Bachelor of Science degree in Business Management, Engineering or Accounting.

Senior Reservoir Engineer (Ref 07 - 0515)
Responsibilities
:
• Provide expert technical advise on reservoir engineering & enhanced oil recovery.• Apply the most appropriate reservoir simulators to evaluate reservoirs for application of enhanced oil recovery methods.
• Lead and conduct related studies and evaluations for filed development.
Requirements:
- Engineering Degree (S1) with 7 - 10 years in reservoir engineering & reservoir simulation.

HSE Coordinator (Ref 08 - 0244)
Responsibilities:

• Provide a local point for the provision of HSE advise and assistant within the company, ensuring an effective HSE culture is fully integrated with all activities.
• The individual will assist to develop and champion the success of the company HSE Management System in accordance with the corporate Expectations, Annual Performance plans and changes in legislation.
Requirements:
- Engineering Degree (S1) and a recognized formal HSE qualifications, together with 12 years experience in Oil & Gas industry as well as 3 years in a health, safety and environment Management role and be able to demonstrate a strong commitment to HSE Management.

Development Geologist (Ref 08 - 0245)
Responsibilities:

• Leads in the creation of 2D & 3D geological a reservoir models as a basis for reservoir simulation.
• Analyze reservoir and well performance together with the RE and PE to maintain and update the reservoir models and propose infill well and intervention activity.
Requirements:
- University degree in Earth Science with 5 - 10 years relevant working experience.
- Good understanding of seismic 3D & 2D interpretation and mapping, log analysis / formation evaluation (advance log analysis / formation evaluation skills would be an advantage).

Production Engineer / Work over engineer (Ref 08 - 0246)
Responsibilities:
• Monitoring & interpreting existing well production.
• Identifying and pursuing optimization opportunities for underperforming wells from wellbore to sales point; this can include work related to downhole configuration optimization, artificial lift selection, facilities optimization including wellsite and system compression, pipelines & process equipment as necessary.
Requirements:
- University degree in Petroleum, Chemical, Civil or Mechanical Engineering with 7 - 10 years experience in Oil & Gas.

Exploration Geophysicist (Ref 08 - 0251)
Responsibilities:

• Undertake regional mapping and identification and definition of prospects using all available geophysical, well and analog data.
• Employ quantitative interpretational studies where appropriate to further the understanding to prospects and discoveries and reduce risk.
• Provide geophysical support to the drilling of exploration, appraisal and development well and recommend appropriate data acquisition programmes.
Requirements:
- Bachelor of Science (preferably MSc) in Geology or Earth Science with an extensive workstation skills and experience in 2D and 3D seismic interpretation with 5 - 10 years relevant working experience.
- Experience in using petroleum system analysis in both regional and detailed prospect assessment.
- Have experience in applied geophysics and Quantitative Interpretation with good understanding of seismic acquisition and processing methods.

Exploration Geologist (Ref 08 - 0252)
Responsibilities:

• Undertake petroleum system studies and regional mapping leading to the identification and definition of prospects using all available geophysical, well and analog data. Understand and apply risking and resource estimation methods.
• Provide geological support to the drilling of exploration, appraisal and development well and recommend appropriate data acquisition programmes.
Requirements:
- University degree in Geology with 5 - 10 years relevant working experience.
- Have a good understanding of geological concept.
- Good understanding of seismic 3D & 2D interpretation and mapping with analytical skills to integrate and interpret a broad variety of data sets.

Junior Operation Geologist (Ref 08 - 0253)
Responsibilities:
• Assist in planning & implementing drilling program in Talisman operated area.
• Good knowledge of all aspects of geological studies from early stage exploration to development stages.
• Good understanding of drilling operation & geological data acquisition in wells.
Requirements:
- University degree in Geology with 3 - 5 years experience in oil and gas.
- Familiar with all aspects relating to exploration geology, tools and methods, log evaluation and basin modeling including close interface with 2D and 3D seismic.
- Experience in 2D/3D workstation interpretation and/or PC geological software tools.

Senior Operation Superintendent (Ref 08 - 0261)
Responsibilities:
• Have strong technical, supervisory, leadership skills in all areas (Production, engineering, operations maintenance, construction, drilling and workover) and committed to HSE management practices.
• Scope of resources : 400 man power in all field disciplines.
• Strong capability for budgeting and controlling.
• Need to have expertise to deal with difficult situation to manage field operations especially when dealing with local authorities and villagers.
Requirements:
- University degree with 10 - 15 years experience in Oil & Gas Industries.

Address your application quoting appropriate reference number to:
Benchmark Recruitmentc/o PT Opac Barata
Wisma Staco 7th Floor,
Jl. Casablanca Kav. 18
Jakarta 12870
Email address :talisman-energy@benchrecruit.com(Please keep files to less than 500k)
TALISMAN ENERGYwww.talisman-energy.com

Project Managers - PT Profab Indonesia

PT Profab Indonesia, We are a Foreign Company with 700+ people in the manufacture of pressure vessels, modules, decks and sub sea equipment for the Oil and Gas industry in our Batam workshop.

Requirements:
a. University graduate with Mechanical Engineering Degree.
b. Min. 5 Years experience in Project Manager of a steel fabrication facility operating ISO 9000 ASME U & U2 quality and safety standards
c. Good understanding of steel fabrication & Planning capabilities.
d. Fluency in both written and spoken English.
e. The Selection will be done in Batam

Excellent salary and benefits will be offered

If you are interested and meet the above qualifications, please send your application letter, comprehensive resume with a recent photograph
PT. Profab Indonesia,
Jl. Bawal, Kav. V, Batu Merah, Batam
or
Fax to: +62-778-413260

Project Engineer - PT Profab Indonesia

PT Profab Indonesia, We are a Foreign Company with 700+ people in the manufacture of pressure vessels, modules, decks and sub sea equipment for the Oil and Gas industry in our Batam workshop.

Requirements:
a. University Graduate with Mechanical Engineering degree.
b. Minimal 3 years experience
c. Strong Background in the management of project.
d. Good understanding of steel fabrication & planning capabilities.
e. Good computer knowledge.
f. Fluency in both written and spoken English.
g. Have computer skill for Microsoft Project.
h. The Selection will be done in Batam

Excellent salary and benefits will be offered

If you are interested and meet the above qualifications, please send your application letter, comprehensive resume with a recent photograph
PT. Profab Indonesia,
Jl. Bawal, Kav. V, Batu Merah, Batam
or
Fax to: +62-778-413260

Design Engineer - PT Profab Indonesia

PT Profab Indonesia, We are a Foreign Company with 700+ people in the manufacture of pressure vessels, modules, decks and sub sea equipment for the Oil and Gas industry in our Batam workshop.

Requirements:
a. University graduate with mechanical engineering degree.
b. Min. 4 years experience in Pressure Vessel design to ASME code using PV Elite
and Structure Design is required.
c. Fluency in both written and spoken English.
d. Good knowledge of Autocad drafting and ASME IX welding and pressure vessel
fabrication.
e. The Selection will be done in Batam

Excellent salary and benefits will be offered

If you are interested and meet the above qualifications, please send your application letter, comprehensive resume with a recent photograph
PT. Profab Indonesia,
Jl. Bawal, Kav. V, Batu Merah, Batam
or
Fax to: +62-778-413260

Drafter - PT Profab Indonesia

PT Profab Indonesia, We are a Foreign Company with 700+ people in the manufacture of pressure vessels, modules, decks and sub sea equipment for the Oil and Gas industry in our Batam workshop

Requirements:
a. Min Academy/Equivalent.
b. Min. 2 years experience in the steel fabrication industry.
c. Good understanding of steel fabrication
d. Familiar with ACAD drafting program (release 2005 as a minimum)
e. Experience on piping structural drafting work.
f. Able to read mechanical and piping drawing.
h. Selection will be done in BATAM

Excellent salary and benefits will be offered

If you are interested and meet the above qualifications, please send your application letter, comprehensive resume with a recent photograph

PT. Profab Indonesia,
Jl. Bawal, Kav. V, Batu Merah, Batam

or
Fax to: +62-778-413260